-
aluminum checker plate anodized black color aluminum tread plate
Black aluminum tread plate also known as diamond plate or checker plate.
Black aluminum tread plate that has non-stamped preformed treads. Made of an aluminum / manganese alloy,Black aluminum tread plate is used as scuff (kick) plates, running boards, mud flaps and more. It cuts cleanly, leaving a smooth edge. Tread plate’s protective treads also help maintain its good looks and make it easy to keep clean.
- Al metal alloy: 1000, 3000, 5000, 6000 series
- Alu temper: O – H112, T3 – T8, T351 – T851 etc
- Pattern: 1 bar, 2 bars, 3 bars, 5 bars etc
- Type: plate, roll ( coil )
- Width: 900mm – 1600mm
- Length: 800mm – 8000mm
- Thickness: 0.8mm – 10mm
Technology: hot rolled ( DC ), cold rolling ( CC ), cast Standard: ASTM B209, GB/T 3880, EN AW, DIN, MSRR, AMS, JIS, AISI, BS etc
Custom serivce: acceptable ( OEM, ODM etc )
Port of Loading: Qingdao, Shanghai, Guangzhou etc China main port
Certifications: GB/T19001-2016/ISO9001:2021, CE, SGS etc
Featuring our top-quality black aluminum tread plate that has a semi-gloss black coating with PVC protection. It is highly suitable for many practical and decorative applications including floors, walls, trailers, garages, gyms, and more.
Our black aluminum tread plate sheets are pressed aluminum sheets bearing a raised tread pattern on one side and are then coated in semi-gloss black for an edgy, modern look. tread plate is also called tread plates, checker plates, and/or durbar plates.
-
China brushed anodized aluminum sheet copper color anodising black aluminium plate
China brushed anodized aluminum sheet copper color anodising black aluminium plate
Anodized aluminum sheet is a sheet metal product consisting of aluminum sheeting exposed to an electrolytic passivation process that imparts a tough, hard-wearing protective finish on its surface. The protective layer formed by the anodizing process is actually little more than an enhancement of the natural oxide layer that exists naturally on the surface of the aluminum.
The aluminum plate of the anode is oxidized, and a thin layer of aluminum oxide is formed on the surface, the thickness of which is 5-20 microns, and the hard anodized film can reach 60-200 microns. The anodized aluminum plate has improved its hardness and abrasion resistance, up to 250-500 kg / mm2, good heat resistance, hard anodized film melting point up to 2320K, excellent insulation, and breakdown voltage 2000V, which has enhanced the anti-corrosion performance. It will not corrode for thousands of hours in ω = 0.03NaCl salt spray. There are a large number of micropores in the thin layer of the oxide film, which can absorb various lubricants, which is suitable for manufacturing engine cylinders or other wear-resistant parts.
-
CRC Manufacture Black Annealed Cold Rolled Steel Coil With SPCC DX51D Q195 Q235
Mill & Slit edge JIS G3141, SPCC, SPCD, SPCE, EN10130, GB Cold Rolled Steel Strip / Strips
As per JIS G 3141 SPCC/SPCD/SPCE/SPCC-1B, EN10130 DC01/DC02/DC03/DC04, DIN1623 ST12/ST13/ST14,
GB/T 700 Q195/Q235/Q345, SAE 1006, SAE 1008 etc
Anneal surface shape: brightness and black surface finish, Mill edge & Slit edge.
Coil Weight max. 7 MT, Coil ID 508mm
Thickness: 0.3~3.0MM
Width: 35~720MM
Minimum order: 50MT per size
-
Good Formability 3003 H22 H14 5052 Aluminium Metal Plates 1100 Flat Aluminum Sheet Plate
3003 Aluminum Sheet
Features
♦ Alloy:3003
♦ Temper: H14, H16, H18, H22, H24, H26, O
♦ Thickness(mm):0.25-10
♦ Width(mm):800-2200
♦ This series aluminum sheet is anticorrosive and its production technology is good.
♦ The main ingredient in it is manganese element and the content is between 1.0% and 1.5%.3000 Aluminum Sheet Applications
As a result of its good property in anti-corrosion, this series aluminum sheet is commonly used in moist environments like air conditioners, refrigerators, at the bottom of cars, etc.3000 series aluminum sheet is approx 20% stronger than the 1000 series, has great workability and may be deep drawn, spun, welded or brazed. The 3000series aluminum sheet is widely used for general purposes. The Alloy are including the AA3003, AA3004, AA3005, AA3102, AA3105, Temper O, H14, H18, H24, H26, H111, H112, F, From thickness 0.2mm-350mm, width 500mm-2300mm, length 500mm-110000mm. With Plain, five bar, stucco, diamond, or mirror surface process, Or coated with PE, PVDF, BRUSH etc. There is (CC) cold rolling and (DC) hot rolling Line.
3003 Aluminum Sheet Approx. 20% higher strength than the 1100 series, but retaining an excellent workability rating. May show some slight discoloration when anodized, but reacts well to mechanical and organic finishings. 3003 is easily welded and brazed, but solder is limited to the torch method. Like 1100, tends to be “gummy” when machined. Non-heat treatable.Typical applications include food and chemical equipment, appliance components, truck and trailer roofing, heat exchangers, and lawn furniture components
-
China quality brass sheet C11000 C10200 C17200 copper plate sheet supplier
Copper plating is electrolytic plating that deposits a layer of copper onto the substrate. This common application is used in the oil and gas industry to prevent galling during make-and-break operations.
The copper most commonly used for sheet and strip applications complies with ASTM B370. It consists of 99.9 percent copper, and is available in six tempers designated by ASTM B370 as: 060 (soft), H00 (cold rolled), H01 (cold rolled, high yield), H02 (half hard), H03 (three quarter hard), and H04 (hard).
Certified oxygen-free high-conductivity copper (Electronic Grade, UNS C10100) contains a minimum of 99.99% Cu, making it the purest metal in common use.
Copper grades are divided into six families: coppers, dilute copper alloys, brasses, bronzes, copper-nickel alloys, and nickel-silver alloys. The first family, the coppers, is essentially commercially pure copper, which normally is soft and ductile and contains less than about 0.7% total impurities
-
China Flat bus bar 1050 1350 1060 1070 1370 Aluminum Busbar for Transformers
China Flat bus bar 1050 1350 1060 1070 1370 Aluminum Busbar for Transformers
In Electric power distribution, a busbar also called bus bar, buss bar or busbar, which is a metallic strip or bar, typically housed inside switchgear, panel boards, and busway enclosures for local high current power distribution.
Material: Aluminum
Product Name: Customized Aluminum Busbar
Surface Treatment: Zinc, Nickel, Tin, Silver, etc.
Tolerance: +/- 0.1mm
Length: up to 6m
Width: 10mm – 200mm
Thickness: 0.15mm – 40mm
Application: Electric
Processing: Stamping, Bending, Drilling, Threading, Polishing, etc. -
Cold rolled low carbon DC01 DC03 DC04 DC05 DC06 steel sheet plate strip coil,
Cold rolled low carbon DC01 DC03 DC04 DC05 DC06 steel sheet plate strip coil
Cold rolled steel coil is the abbreviation of cold-rolled plain carbon structural plate, also known as cold-rolled sheet, commonly known as the cold plate. Cold plate is made of ordinary carbon structural steel hot rolled steel strip, after further cold rolling steel plate thickness is less than 4mm. Due to the rolling at room temperature, do not produce iron oxide, so cold plate surface quality, high dimensional accuracy, coupled with the annealing, mechanical and technological properties are superior to hot-rolled steel sheet, in many areas, especially household electrical appliance manufacturing, has been gradually replaced with its hot-rolled steel sheet
-
DC01 Steel Coil prime Cold rolled Steel Sheet Strips Steel Plate
Cold Rolled Steel Strip SPCC DC01 DC04 Cold Rolled Steel Coil 0.3-3.0mm
Name DC01 Steel Coil prime Cold rolled Steel Sheet Strips Steel Plate Standard JISG3141 2005 / EN 10130 1998 / GB/T 708 Grade Q195,Q215,Q235,SGCC,CGCC,SPCC,SPCD,SPCE,DX51D,DX52D,SPHC,DC01,DC03,DC04,ST12.. Width 600~1250mm Thickness 0.125~3.0mm Surface treatment chromated / galvanized/oiled/annealed ID coil 508mm or 610mm Coil weight 3-8 MT Package: Standard exporting package Application Industrial panels, roofing and siding for painting
Price terms FOB,CFR,CIF
Payment terms 30%T/T in advance+70% T/T
-
custom Rectangular busbar square angle EN AW 1350 aluminum Flat bus bar
custom Rectangular busbar square angle EN AW 1350 aluminum Flat bus bar
Pure aluminum has a conductivity of about 65 percent of the International Annealed Copper Standard (lACS). Aluminum can be produced 99.99 percent pure; however, this purity is costly to achieve and the mechanical properties are low.
Aluminum 1350 is a commercial high-purity aluminum with 61 percent conductivity. The tensile strength of each 1350 temper is determined by the amount of work given the metal during fabrication. Today, most 1350 aluminum bus conductors are of -Hlli temper for extrusions, -H112 for sawed rolled plate, and -F for cast bars.
The designations 1350-F and 1050 are often used in the trade for designating cast bus bars made by run-out into sand molds,or continuous run-out through an orifice. -
1060 3004 Stucco Embossed Aluminum Sheet Coil For Solar Panel Systems
1060 3004 stucco embossed aluminum sheet coils for solar panel systems
The embossed oxidized panel is beautiful, with thickness from 0.25mm to 2.0mm, while the maximum width is 1250mm, after pattern embossed, the thickness could be 0.25 to 2.0mm more. Additionally, we offer processing service for anozdizing aluminum sheet, which could further strength sheet’s ability of anti-corrosion.
Pattern: Rhombic veins, orange peel veins, diamond veins, five-rib veins etc.
Stucco Embossed Aluminum Sheet are widely used in refrigerator, solar heat reflectors, decorative aluminum products, lamps, bags, disinfection box, air conditioning, ventilation ducts, indoor & outdoor decoration, machinery and equipment housing and other industries. Embossed finish can enhance the thickness and strength of aluminum.
