-
EN AW-1080A aluminum sheet plate Aircraft materials
Aluminium 1080A, with the European designation EN AW-1080A is a ‘commercially pure’ alloy, minimum 99.8% Al, available as round bar or wire
For the 1080 industrial pure aluminum, with high plasticity, corrosion resistance, electrical conductivity and thermal conductivity, but low strength, heat treatment can’t strengthen cutting; welding, atomic hydrogen welding and contact welding, brazing; bear various pressure processing and extension, bending.
Temper: F, O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H111, H112, H114
Thickness:0.2-350mm
Width:30-2600mm
Length:200-11000mm
Mother coil: CC or DC
Weight: About 2mt per pallet for general size
MOQ: 5-10ton per size
Protection: paper inter layer, white film, blue film, black-white film, micro bound film, according to your requirement.
Surface: clean and smooth, no bright speck, corrosion, oil, slotted, etc.
Standard product: GBT3880, JIS4000, EN485, ASTM-B209, EN573
Delivery time: about 30days after receiving the deposit
Payment: T/T, L/C at sight
Trading terms: FOB, CIF, CFR
-
1070 aluminum sheet plate factory
1070 is a pure aluminium alloy. It is a wrought alloy with a high corrosion resistance and an excellent brazing ability.
1070 aluminum plate is a material used to manufacture some structural parts with specific properties, with high plasticity, corrosion resistance, good electrical conductivity and thermal conductivity, However, the strength is low, it is not strengthened by heat treatment, and the machinability is not good, so it can accept contact welding and gas welding. Use its advantages to manufacture some structural parts with specific properties, such as aluminum foil made of gaskets and capacitors, electronic tube isolation nets, protective sleeves for wires and cables, nets, wire cores and aircraft ventilation system parts and decorative parts.
1070 aluminum sheet contains 99.7% Al, which is the alloy sheet with the highest Al content in the 1xxx series of industrial aluminum. Therefore,1070 aluminium alloy has retained the excellent properties of pure aluminium itself, suitable elongation processing, good thermal conductivity, high corrosion resistance, and more. In addition, the mechanical properties of the 1070 aluminium sheet were slightly enhanced by the addition of a few alloying elements. Similarly, as a representative alloy sheet of industrial aluminium, 1070 aluminium sheet price is economical.
-
1060 aluminum sheet supplier aluminium plate
1060 aluminum sheet is another representative product in 1000 series aluminum alloys. 1060 aluminum alloy is formed by pure aluminum added by a small amount of copper element, which has excellent forming processing characteristics, high corrosion resistance, good weld ability and conductivity. The same as 1050 aluminum sheet, the aluminum sheet 1060 is widely used in products with low strength requirements, such as chemical instruments, sheet metal processing parts, deep drawing or spinning concave containers, welding parts, heat exchangers, clock surfaces and disk surfaces, nameplates, kitchenware, decorations, reflectors and so on.
Temper: F, O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H111, H112, H114
Thickness:0.2-350mm
Width:100-2600mm
Length:200-11000mm
Mother coil: CC or DC
Weight: About 2mt per pallet for general size
MOQ: 5ton per size
Protection: paper inter layer, white film, blue film, black-white film, micro bound film, according to your requirement.
Surface: clean and smooth, no bright speck, corrosion, oil, slotted, etc.
Standard product: GBT3880, JIS4000, EN485, ASTM-B209
Delivery time: about 30days after receiving the deposit
Payment: T/T, L/C at sight
Trading terms: FOB, CIF, CFR
-
1050 aluminum sheet aluminium plate
Aluminum as one of most important metals is widely used in industry and our daily life, when it comes to the aluminum alloy, the 1000 series aluminum sheet come to our mind, there are two typical aluminum sheets in 1000 series aluminum sheet alloy, which are 1050 and 1060 aluminum, these two-aluminum alloy are somewhere looks same but they have different content.
1050 aluminum sheet and 1060 aluminum sheet are all belongs to 1000 series pure aluminum sheet, the aluminum content of them is all up to 99%, the difference is that to 1050 aluminum sheet, the content is 99.5%, while to 1060 aluminum sheet, the content is 99.6%, in other words, the aluminum content of 1060 aluminum sheet is a little higher than 1050 aluminum sheet
But in general, the chemical composition and the physical property of them are similar, so they can replace each other, nowadays, 1060 aluminum sheet are used in industry application instead of 1050 aluminum sheet.
-
ASTM EN10310 JISI Standard carbon steel strip Cold rolled Steel strip coil CRC
ASTM EN10310 JISI Standard carbon steel strip Cold rolled Steel strip coil CRC
Cold rolled steel sheet are mainly used in automobile, printed metal pail, building, building materials, and bicycle, etc. Additionally, it is the best material to manufacture organic coated strip.
Standard:JIS, ASTM, EN10130
Grade: SPCC, SPCD, ST12, ST13, ST14/16, DC01, DC02, DC03, DC04, DC05, DC06, Q195, Q195L,SAE1008,SAE1006
Thickness: 0.2-5.0mm
Width:15-1500mm.
(1) when the strip steel is rolled in a cold state, because of the work hardening of the strip steel, it must be softened again by intermediate annealing, and its plasticity should be restored in order to continue rolling;
(2) Before rolling, the surface scale of strip steel must be removed, thus ensuring the surface smoothness of strip steel and reducing the wear of rolls;
(3) Tension rolling is adopted, which ensures the good shape of strip steel, controls the thickness deviation of strip steel, reduces the rolling pressure, and is beneficial to rolling thin gauge products.
(4) Process cooling and lubrication are adopted, which is convenient to control the temperature of the roll and strip steel, reduce the friction between the roll and strip steel and reduce the rolling pressure, which is beneficial to the shape control and prevents the strip steel from sticking to the roll.
Cold rolled steel strip is widely used in cutting-edge technical fields, such as automobile, instrumentation, radio, national defense and aerospace industry, etc.
-
Customized 6061 6101 Alloy Aluminium Sheet for Vehicles Molds Parts
6061 aluminum alloy is a high-quality aluminum alloy product produced by heat treatment and pre-stretching process. Although its strength cannot be compared with 2XXX series or 7XXX series, its magnesium and silicon alloys have many characteristics, excellent processing performance and excellent welding characteristics. And electroplating, good corrosion resistance, high toughness and no deformation after processing, dense material without defects and easy to polish, easy to color film, excellent oxidation effect and other excellent characteristics.
The main alloying elements of 6061 aluminum alloy are magnesium and silicon, and form Mg2Si. If it contains a certain amount of manganese and chromium, it can neutralize the bad effects of iron; sometimes a small amount of copper or zinc is added to improve the strength of the alloy without significantly reducing its corrosion resistance; there is still a small amount of conductive material. copper to offset the adverse effects of titanium and iron on electrical conductivity; zirconium or titanium can refine grains and control recrystallization; in order to improve machinability, lead and bismuth can be added. Mg2Si is solid-dissolved in aluminum, which makes the alloy have artificial aging hardening function. The main alloying elements in 6061 aluminum alloy are magnesium and silicon, which have medium strength, good corrosion resistance, weldability, and good oxidation effect. -
Aluminum Coils factory China
Aluminum can roll, slit and anneal aluminum coil according to your customized specifications. All the rolled aluminium products in processing scope cover 1000 to 7000 series aluminum alloys and are mainly used as aluminum casting products,which are widely applied in electronics, packaging, construction and machinery fields.
Alloys:
- 5754 Aluminum Coil
- 5083 Aluminum Coil
- 6061 Aluminum Coil
- 5052 Aluminum Coil
- 3003 Aluminum Coil
- 1060 Aluminum Coil
- 1050 Aluminum Coil
-
2618A aluminum plate sheet for Aerospace defence components
Aluminium Alloy 2618A (Aluminum 2618) is a high strength aluminium alloy. Alloy 2618 (2618A) has good machinability and is fair resistance to atmospheric attack. Aluminium Alloy 2618A (Aluminum 2618) is typically used in aerospace and defence components.It is commonly used for pistons and rotating aircraft parts due to it’s ability to work in higher temperature applications. 2618 is also used in high performance autosport applications.
Standards : ASTM B209 / ASME SB209 • Dimensions:- ASTM, ASME, and API • Grade: Aluminium Alloy 2011 (UNS A92011), Aluminium Alloy 2014 (UNS A92014), Aluminium Alloy 2017 (UNS A92014), Aluminium Alloy 2017A (UNS AA2017A), Aluminium Alloy 2618 (UNS A92618), Aluminium Alloy 2024 (UNS A92024). • Temper: O, F, H12, H14, H16, H18, H19, H22, H24, H26, H32, H34, H36, H38, H111, H112, H321, T3, T4, T5, T6, T7, T351, T451, T651, T851 • Thickness : 0.2~300mm • Width : 500~2500mm • Length:- 500~10000mm • Form: Bright, polished, hair line, brush, sand blast, checkered, embossed, etching, etc • Processing: Cutting, Forming Drilling / Machining, Grinding, Testing
-
GI galvanized steel sheet zinc coating 12 gauge 16 gauge metal Hot Rolled
Hot Rolled Zinc Galvanized Steel Sheet Zinc Coated Steel Plate
Hot-dip galvanizing is the reaction of molten metal with an iron substrate to produce an alloy layer, thereby combining the substrate and the plating layer. Hot-dip galvanizing is to pickle iron and steel parts first. In order to remove iron oxide on the surface of iron and steel parts, after pickling, it is cleaned in an ammonium chloride or zinc chloride aqueous solution or a mixed solution of ammonium chloride and zinc chloride.And then sent to the hot-dip plating bath. Hot-dip galvanizing has the advantages of uniform coating, strong adhesion and long service life.
Technical Standard EN10147, EN10142, DIN 17162, JIS G3302, ASTM A653 Steel Grade Dx51D, Dx52D, Dx53D, DX54D,ST12-15, S220GD, S250GD, S280GD, S350GD, S350GD, S550GD; SGCC, SGHC, SGCH, SGH340, SGH400, SGH440, SGH490, SGH540, SGCD1, SGCD2, SGCD3, SGC340, SGC340 , SGC490, SGC570; SQ CR22 (230), SQ CR22 (255), SQ CR40 (275), SQ CR50 (340), SQ CR80(550), CQ, FS, DDS, EDDS, SQ CR33 (230), SQ CR37 (255), SQCR40 (275), SQ CR50 (340), SQ CR80 (550); or Customer’s Requirement Type Coil/Sheet/Plate/Strip Thickness 0.12-6.00mm,or customer’s requirement Width 600mm-1500mm, according to customer’s requirement Type of Coating Hot Dipped Galvanized Steel(HDGI) Zinc Coating 30-275g/m2 Surface Treatment Passivation(C), Oiling(O), Lacquer sealing(L), Phosphating(P), Untreated(U) Surface Structure Normal spangle coating(NS), minimized spangle coating(MS), spangle-free(FS) Quality Approved by SGS,ISO ID 508mm/610mm Coil Weight 3-20 metric ton per coil Package Water proof paper is inner packing,galvanized steel or coated steel sheet is outer packing , side guard plate,then wrapped by seven steel belt.or according to customer’s requirement Export market Europe, Africa, Central Asia, Southeast Asia, Middle East, South America, North America, et -
soft forming quality Electro hot dip galvanized steel plate SECC JIS G 3313 Electro-Galvanized Commercial Cold Rolled
soft forming quality Electro hot dip galvanized steel plate SECC JIS G 3313 Electro-Galvanized Commercial Cold Rolled
Electro Galvanized Steel(EGI) EGI is made in the way of electro galvanizing zinc over cold rolled steel. This product with high corrosion resistance has less coating than GI steel but features even coating thickness, good surface, and coating at a low temperature
SECC steel is electro-galvanized commercial quality cold rolled steel which is basically cold rolled and then coated with zinc in an electro-galvanizing line. SECC is a material grade and designation defined in JIS G 3313 standard. It is a low-cost steel metal grade with improved thermal conduction that is mostly utilized for the casings of computer and other electronic accessories. As a basic Zinc-Coated Carbon Steel it can be enumerated in mild steel which is processed under electro galvanization, unlike the SGCC steel which is processed hot-dip galvanized steel.
The based metal is actually made up of commercial quality cold rolled steel but the coating is made up of zinc through electro galvanization process unlike the hot-dip galvanized steels. Following forming operations can be performed on this type of steel:
- Pressing
- Blanking
- Shaping
- Lancing
- Piercing
- Notching
- Stamping
However, any specific forming operation should be properly investigated and testing should be performed before the execution.
Following are the available forms of SECC steels in the global market:
- Galvanized Coils
- Slit Edge Galvanized Coils
- Cut to Length Galvanized Sheets
