-
Anti-Fingerprint (AFP) SGCC SGCH Hot Dipped GI Coil DX51D-56D Galvanized Steel Coil
Anti-Fingerprint (AFP) SGCC SGCH Hot Dipped GI Coil DX51D-56D Galvanized Steel Coil
The anti-fingerprint effect means that fingerprints on the surface cannot be seen at all by the naked eye, or only very slightly. Although the fingerprint is actually on the surface, it is essentially “invisible“.
product Galvanized Steel Coil material Q195/Q235/Q235B/Q345/Q345B/SS400/DC01-04/DX51D-56D/SGCC SGCH Thickness 0.12 ~ 3.00 mm (cold rolled)
1.20 ~ 4.60 mm (Hot-rolled )Width 10 – 600 mm (strip)
600 – 1250 mm (coil)Color Plain Surface Treatment Galvanized Coated, Anti-Fingerprint (AFP) Grade DX51D,DX52D,DX53D SGCC SGCH Standard AISI ASTM BS DIN GB JIS Tolerance ±1% Technique Cold rolled or Hot rolled Application Widely used in road, railway,
civil construction, water conservancy construction; all kinds of machinery, electrical appliances,window protection and aquaculture, etc.Processing Service Bending, Welding, Decoiling, Cutting, Punching Coil ID 508mm or 610mm Coil weight 3 – 8 ton or as client requirement Zinc coating 30g – 275g / m2 Spangle Big spangle,Regular spangle,Mini spangle,Zero spangle Galvanized steel coil, immersing the thin steel plate in the molten zinc bath, and adhering a layer of zinc thin steel plate on the surface. Galvanised steel coil is mainly produced by the continuous galvanizing process, that is, the coiled steel plate is continuously immersed in the zinc-melted plating tank to make galvanized steel plate; alloyed galvanized steel plate. This kind of steel plate is also made by the hot-dip method, but it is heated to about 500 °C immediately after exiting the tank to form an alloy film of zinc and iron. This galvanized steel coil has good paint adhesion and weldability.
Galvanised steel coil application:
1. Buildings And Constructions
Floor Decks, Ceilings, Duct Work, Roofing, Siding, Sashes, Beams, Fences, Verandas, Shutters, Awnings,
Partitions, Indoor Decorations, Pipes, Ventilators, Sheds, Culverts.
2. Transportation
Body Pane, Air Cleaners, Oil Filters, Fuel Tanks, Containers, Highway Barriers.
3. Appliances
Light Fittings, Washing Machines, Dryers, Coolers, Vending Machines, Water Heaters, Stoves, Refrigerators, Freezers, Tool Boxes.
4. Agriculture
Barns, Dryer Panels, Animal Houses, Hoppers. Bar Supporters, Irrigation Systems, Green Houses.
-
EN 10130 DC01 Steel 1.0330 cold rolled steel flat sheet
DC01 steel (1.0330 material) is a European standard cold-rolled quality low-carbon steel flat product for cold forming. In BS and DIN EN 10130 standard, it contains 5 other steel grades: DC03 (1.0347), DC04 (1.0338), DC05 (1.0312), DC06 ( 1.0873) and DC07 (1.0898), the surface quality is divided into 2 types: DC01-A and DC01-B. In addition, this steel is also used under electrogalvanizing conditions. The designation of the steel is DC01+ZE (or 1.0330+ZE), and the standard is EN 10152.
DC01 Meaning and Definition
- D: (Drawing) flat products for cold forming
- C: Cold rolled
- DC01: Drawing quality
- DC03: Deep drawing quality;
- DC04, DC05: Special deepdrawing quality;
- DC06: Extra deepdrawing quality;
- DC07: Super deep drawing quality.
-
304 316 Cold rolled stainless steel sheet coil
Stainless steel products are one of the most popular raw materials in construction and manufacturing. Due to its unique mechanical and physical properties, stainless steel coil has been widely used in the production of kitchen appliances and industrial equipment. They are rugged, corrosion resistant, lightweight and require low maintenance. In addition, we support customization of any product. In industry (especially in manufacturing), different grades of stainless steel coils can be found, such as 316, 316L, 304L, 304, 410S, 321, 201, 303, 304n, 2507, 2304, etc
Stainless steel sheet or coil is widely used in high-temperature and electric industry, medical devices, construction, chemistry, food industry, agriculture, and ship components.
Stainless steel also applies to food and beverage packaging, kitchen supplies, trains, aircraft, conveyor belts, vehicles, bolts, nuts, springs, and screen mesh etc.
Thickness：0.3-260
Width：1000，1219，1500，2000，2500，3000， etc
Length：1000，1500，2438，3000，5800，6000，9000，12000， etc
Products can be customizedSurface：BA，2B，NO.1，NO.4，4K，HL，8K
Standard：ASTM，AISI，JIS,GB， DIN,EN -
ASTM A1008 DIN16723 EN10130 cold rolled steel plate sheet for Oil drum
Cold rolled coil is produced by pickling hot-rolled coil and rolling it uniformly at an appropriated temperature to a thinner thickness. It has excellent surface configuration and superb mechanical properties for use in automobile and electronic appliance production.
Standard Specification JIS G 3141:2005 SPCCT-SD SPCD-SD, SPCE-SD, SPCF-SD,SPCG-SD ASTM A1008 CS TYPE A /B/ C DS TYPE A /B, DDS EDDS EN10130:2005 DC01 DC03 DC04 DC05 DC06 EN10268:2006 HC420LA HC380LA HC340LA HC300LA HC260LA SAE J403 SAE1006 SAE1008 SAE1010 JIS C2553 DC01EK DC03EK DC05EK Chemical Components:
Grade Chemical Components C Mn P S Alt St12 ≤0.10 ≤0.50 ≤0.035 ≤0.025 ≥0.020 St13 ≤0.08 ≤0.45 ≤0.030 ≤0.025 ≥0.020 St14 ≤0.08 ≤0.40 ≤0.025 ≤0.020 ≥0.020 Mechanical Properties:
1. Yield Strength: ≤320MPa
2. Tensile Strength: ≤370MPa
3. Elongation (L=50mm, b=25mm) When:
(1) Nominal Thickness <0.25mm: 30%
(2) Nominal Thickness 0.25mm-<0.40: 32%
(3) Nominal Thickness 0.40-<0.60mm: 34%
(4) Nominal Thickness 0.60-<1.0mm: 36%
(5) Nominal Thickness 1.0-<1.6mm: 37%
(6) Nominal Thickness >1.6mm: 38%
Application:
1. Base metal for coated and dipped products.
2. Home appliance and home furniture
3. Bicycle
4. Building industry
5. Battery Shell
6. Automobile fitting, hardware
7. Industrial products including motors, generators
Size Range: 0.30~3.0mm x 800–2000mm x Coil/Sheet
Coil ID: 508mm/610mm
Coil weight: 5—25MT
Bundle weight: max 2.5mt or max 5mt
Available Chinese Mill: WISCO,Capital Steel(Shougang), Ansteel, Maanshan, Baotou, Lianyuan, Tangshan, Jinan, Panzhihua, Kunming, etc and private mills
-
Galvanized Steel Coil Sheets DC51D+Z DC51+ZF DD51D+Z DC52D+Z DC52D+ZF DC51D+AZ
Galvanized Steel Sheet is defined as a carbon steel sheet coated with zinc on both sides. Galvanized Steel Coil produce galvanized steel with two main processes: continuous hot dip galvanizing and electro galvanizing.
Specifications of Galvanized Steel Coils that We Can Provide :
1) Standard: JIS G3302 1998, ASTM A653M/A924M 2004, all according to the customer’s request
2) Grade: SGCC, SGCH,DX51D, Q195,Q235 all according to the customer’s request3) Capacity: about 12000 tons per month
4) Thickness: from 0.13mm to 2mm, all available
5) Width: from 600mm to 1250mm, regular size:750-762mm,900-914mm,1000mm,1200mm,1219-1250mm all available
6) Coil ID: 508mm
7) Coil weight: from 2-10MT, according to the customer’s request
8) Zinc coating weight: 40g/m2-275g/m2
9) Spangle: regular spangle,big spangle, small spangle and zero spangle
10) Surface treatment: Chemical passivating, oils, passivating oils,skin passed
11) Edge: mill edge, cut edge
12) Min trial order 25 ton each thicknessApplications of Our Galvanized Steel Coils :
1.Construction and building: roofing; ventilating duct; handrail; partition panel,etc.
2.Further processing: coating base plate.
3.Electric appliance: refrigerator; washing machine; recorder; microwave, etc.The hot dip process includes passing the steel through a molten zinc bath, and the electro galvanizing process includes applying zinc through electrolytic treatment. As a result, the zinc layer is firmly adhered to the base metal through the iron-zinc bonding layer. Our hot-dip galvanized products are manufactured in accordance with specifications, and our electro-galvanized products comply with the specifications.
Galvanizing is one of the most effective and economical methods for protecting bare steel from corrosive environments. Zinc is not only a barrier between steel and the environment, but also sacrifices itself to protect the steel plate below. When two different metals are in contact and coupled with water and oxygen, sacrifice or current protection occurs. Zinc preferentially corrodes iron in steel. This protection prevents corrosion of the steel in areas not covered by zinc. Therefore, the diffusion of corrosion from cutting edges, drilling holes, etc
-
SPHC Pickled DD11 Commercial use Hot Rolled Steel plate sheet for automotive deep drawing parts
SPHC Pickled DD11 Commercial use Hot Rolled Steel plate sheet for automotive deep drawing parts
DD11 is a very low carbon, hot rolled steel sheet material extensively used in cold forming in the dry or pickled and oiled condition. The material has good welding qualities and is ideal for general forming applications. DD12, DD13 and DD14 specify even lower chemical and mechanical levels making them perfect for deep drawing, extra deep drawing and more complex presswork.
HR steel materials like DD11, SPHC, SPHD, STW22, S315MC, S420MC are Mainly used as various substrates and widely applied in automobile manufacture, cold pressing parts and structural parts, etc.
-
A283 A285 Hot rolled steel plate Cold rolled steel plate A36
A283 Grade C steel belongs to carbon structural steel. The tensile of A283 Grade C steel plate is low or mid-low. A283 Grade C steel plate is delivered in hot rolled condition. RuiYi provides hot rolled A283 Grade C steel plates thickness up to 220mm.
Category: Carbon Structural Steel
Steel Grade: Grade C
Standard: ASTM A283
Available: plates, wide flats, strips, sections and bars
Deliver Condition:
A283 Grade C steel plate can be delivered in +AR, +N, or +M condition.
Normalizing rolling (+N): rolling process in which the final deformation is carried out in a certain temperature range leading to a material condition equivalent to that obtained after normalizing so that the specified values of the mechanical properties are retained even after normalizing.
As-rolled (+AR): delivery condition without any special rolling and/or heat treatment condition.
Thermo-mechanical rolling (+M): rolling process in which the final deformation is carried out in a certain temperature range leading to a material condition with certain properties which cannot be achieved or repeated by heat treatment alone.
Machinability:
A283 Grade C steel is machinable with common operations such as cutting, grinding and welding.
Application:
A283 Gr C steel is mainly used to build factories, high voltage power transmission tower, Bridges, vehicles, boiler furnace, containers, ships, etc., also a lot less used as performance requirements for mechanical parts. -
silicon steel coil
Electrical steel is mainly divided into GO electrical steel and NGO electrical steel two categories.Easy magnetization direction of GO electrical steel distribution along the rolling direction, the direction of rolling with high induction, excellent characteristics such as low iron loss and low magnetostriction, while the magnetic domain refinement processing technology, lower iron loss of performance, and are widely used in the transformer industry.
Product Description:
1.Grain-Oriented Electrical Steel
- Thickness:0.23mm,0.27mm,0.30mm,0.35mm
- Width: 900-1200mm
- Inner Diameter: 508mm
2.Non-Oriented Electrical Steel
- Thickness:0.20mm,0.35mm,0.50mm,0.65mm
- Width: 800-1250mm
- Inner Diameter: 508mm
We supply to silicon steel scrap,silicon steel coil, silicon steel sheet,silicon steel,silicon steel plate,silicon steel,cold-rolled non grain oriented silicon steel coil,silicon coil, silicon steel coils,Grain Oriented Silicon Steel,Electrical Steel Coils, Grain Oriented Silicon Electrical Steel,Electrical steel,Silicon steel,Magnetic Steel, Grain-Oriented Electrical Steel, oriented electrical steel,Grain Oriented Silicon Steels,Grain Oriented Flat-rolled Electrical Steel,rolled Electrical Steel, Non-Oriented Electrical Steel,Oriented Electrical Steel,Non-oriented Silicon Steel, CRNGO, GO Electrical Steel, high induction GO Electrical Steel, NSGO, domain refined NSGO, NGO electrical steel, Common GO electrical steel, High induction GO electical steel, High induction GO electical steel,etc.
-
Hot dipped Regular Spangle Galvanized Steel Coil G350 z600
Regular Spangle Galvanized Steel Coil G350 z600/GI/HDGI/Galvanised steel/Galvanized coils
HGI/GI/Hot dip Galvnaized steel coil/Galvanized steel coil G550 z275/zinc steel/steel coil/zinc steel coil/Hot dip zinc steel coil/Regular Spangle Galvanized Steel Coil G350 z600
Product Description:
- Product Description:GI COIL,GI SHEET, GI PLATES DX 51D/SGCC,G350,G550
- Product Name: Hot dip galvanized steel coil /Galvanzied steel Coil/HDGI/GI /GI Coil /GI sheet
- Base Metal:cold rolled steel coil
- Spangle:zero spangle, regular spangle,mini spangle,big spangle
- Thickness: from 0.15mm to 5.0 mm
- Width:from 600mm to 1500 mm
- Standard:AISI,ASTM653,BS,DIN,JIS3302,GB
- Grade:DX51D,DX52D/DX53D/DX54D, S350, S400,S450, S550, G550,SGCC,G350ST01Z,CSA,CSB,FSA,FSB,DDS
- Zinc coating:From z60g/m2 to z600g/m2 , z60g/m2,z80g/m2,z90g/m2,z100g/m2, z120g/m2,z140g/m2, z150g/m2, z160g/m2, z180g/m2, z200g/m2,z250g/m2, z275g/m2, z300g/m2, z400g/m2, z500g/m2, z600g/m2
- Minimum order quantity:20 ton for each size.
- Certification:ISO9001, SGS
- Payment terms: TT or LC at sight.
- Application:Building field;Home appliances;Automatic Industry
-
DC01 Cold rolled steel sheet coil DIN EN 10130 10209 DIN 1623
COLD ROLLED STEEL SHEET AND COIL – (DC01 BS EN 10130:2006)Cold rolled steel, (often referred to as Cold reduced or CR), is a low carbon product, produced using raw material such as coke and coal at steel mills through out the world.
DC01 steel (1.0330 material) is a European standard cold-rolled quality low-carbon steel flat product for cold forming. … In addition, this steel is also used under electrogalvanizing conditions. The designation of the steel is DC01+ZE (or 1.0330+ZE), and the standard is EN 10152
