-
DX51D SGCC color coating Galvanized steel coil
PPGI is pre-painted galvanised iron, also known as pre-coated steel, coil coated steel, color coated steel etc., typically with a hot dip zinc coated steel substrate. The term is an extension of GI which is a traditional abbreviation for Galvanized Iron.
Using Hot Dip Galvanized Steel Coil as the substrate, PPGI is made by first going through surface pretreatment, then the coating of one or more layers of liquid coating by roll coating, and finally baking and cooling. The coatings used including polyester, silicon modified polyester, high-durability, corrosion-resistance and formability
DX51D PPGI Prepainted Galvanized Steel Coils
Standard: AISI, ASTM, BS, DIN, GB, JIS Thinckness: 0.12mm-0.8mm As to your requirements Material: Q235 Q345 Cold Rolled steel coil Grade: SGCC,SGCD,SPCC,DX51D,DX52D,DX53D Width: 600mm-1250mm Color: Red, Blue, Black, White, Gray or customized As to your requirements Substrate Cold rolled Substrate /Hot rolled Substrate Application Fields: plant,warhouse ,officebuilding, aeroshed , high-riser building etc Painting Thickness Top side: 20+5microns; Bottom side: 5~7microns. Color System Produce according to RAL Color System or as per buyer’s color sample. Painting structure Top surface Bottom surface Primer coating No coating 1/0 Primer coating Primer coating 1/1 Primer coating + Finish coating No coating 2/0 Primer coating + Finish coating Primer coating or single back coating 2/1 Primer coating + Finish coating Primer coating + Finish back coating 2/2 -
High strength tension hot rolled pickled oiled S235 S355 S420 S550 structural carbon steel slitted strip coil
High strength tension hot rolled pickled oil S235 S355 S420 S550 carbon steel slitted strip coil
S355 grade steel is a medium tensile, low carbon manganese steel which is readily weldable and possesses good impact resistance (also in sub-zero temperatures).
What is the difference between S275 and S355 steel?S275 provides a lower strength (than S355) but has good machinability and can be welded. The average minimum yield for S275 steel is 275 N/mm² giving its name: S275. S355 is often used in the most demanding environments such as the offshore industry.EN10149 S420MC steel plate/sheet,EN10149 S420MC steel plate/sheet, under EN standard, we can regard S420MC steel plate/sheet as high yield strength steels for cold-forming steels.
S420MC steel plate is mainly used as high yield strength steels for cold-forming steels.
The EN10149 S420MC steel is equivalent to SEW092 QStE420TM, NFA E420D, UNI FeE420TM, ASTM X60XLK and BS HR50F45 steel grades.
S420MC EN 10149-2 Number:1.0980 Comparision of steel grades SEW092 QStE 420TM NFA36-231 E420D UNI8890 FeE420TM ASTM 060XLK BS1449 HR50F45