-
Cold Rolled Steel Plate DC01
Cold-rolled thin steel plate is the abbreviation of ordinary carbon structural steel cold-rolled plate. It is also called cold-rolled plate, commonly known as cold plate, and is sometimes mistakenly written as cold-rolled plate.
Cold plate is made of ordinary carbon structural steel hot-rolled steel strip, which is further cold-rolled into a steel plate with a thickness of less than 4mm.
Since rolling at room temperature does not produce iron oxide scale, the cold plate has good surface quality and high dimensional accuracy. Coupled with annealing treatment, its mechanical properties and process performance are better than hot-rolled thin steel plates.
In many fields, especially In the field of home appliance manufacturing, it has gradually been used to replace hot-rolled thin steel plates.
-
European standard Grade DC01 Cold rolled steel strip SPCC
DC01 is cold continuous rolled low carbon steel plate and steel strip. European standard Grade DC01 Cold rolled steel strip is similare as Japanese standard SPCC and DIN standard ST12.Dc01 is a European standard, using Baosteel enterprise standard Q/BQB402 or EU standard EN10130, which is equivalent to the cold-rolled plate of 10 steel in GB699 high-quality carbon structural steel, with a carbon content of about 0.10%.
-
304 316 Cold rolled stainless steel strip coil BA finish stainless steel plate
Stainless steel is essentially a low carbon steel which contains chromium at 10% or more by weight. It is this addition of chromium that gives the stainless steel a unique corrosion-resisting properties. RAYIWELL / TOP Metal Materials can supply ss201, ss304, ss316, ss316L or ss430 steel plate at very competitive cost.
-
EN10083 ASTMA672 ASME C60 S60C CK60 SAE 1060 cold rolled carbon steel strip
EN10083 ASTMA672 ASME C60 S60C CK60 SAE 1060 cold rolled carbon steel strip is an unalloyed heat treatable steel. It is mainly used forparts of mechanical and vehicle engineering. Typical application such as: wheels, rims, toothed shafts, cylinders, shafts, axles, pins, screwdrivers, pliers and similar items.
-
EN10132 Standard SAE1075 cold rolled carbon steel strip CK75 C75 C75S Spring steel strip
EN10132 Standard SAE1075 cold rolled carbon steel strip CK75 C75 C75S Spring steel strip has a carbon content of 0.7-0.8% making it a multi-purpose carbon steel with good spring properties. Therefore, it is a commonly used carbon steel in a wide range of engineering applications.
-
Cold Rolled Non-Grain Oriented 50A800 Electric Silicon Steel Sheet Coil
Silicon steel contains 1.0-4.5% silicon and silicon alloy steel with a carbon content of less than 0.08% is called silicon steel. It has the characteristics of high magnetic permeability, low coercivity, and large resistivity, so hysteresis loss and eddy current loss are small. Mainly used as magnetic materials in motors, transformers, electrical appliances and electrical instruments。
-
C27QH110 Grain Oriented Electrical Steel Cold Rolled Silicon Steel Sheet for Transformer Core Plate
Silicon steel is a special electrical steel, also known as silicon steel sheet. It is composed of silicon and steel, the silicon content is usually between 2% and 4.5%. Silicon steel has low magnetic permeability and resistivity, and high resistivity and magnetic saturation induction. These properties make silicon steel an important application in electrical equipment such as motors, generators and transformers.
The main characteristics of silicon steel are low magnetic permeability and high electrical resistivity, which enable it to reduce eddy current loss and Joule loss in the iron core. Silicon steel also has a high magnetic saturation induction, making it able to withstand higher magnetic field strength without magnetic saturation.
The application of silicon steel is mainly concentrated in the field of power equipment. In the motor, silicon steel is used to manufacture the iron core of the motor to reduce eddy current loss and Joule loss and improve the efficiency of the motor. In generators and transformers, silicon steel is used to manufacture iron cores to increase magnetic saturation induction and reduce energy loss.
In general, silicon steel is an important electrical material with excellent magnetic permeability and resistance characteristics. It is widely used in the field of power equipment to improve the efficiency and performance of equipment
-
Cold Rolled steel strip coil DC01
EN 10130 DC01 is a European Standard that applies to cold rolled low carbon steel flat products for cold forming, which specifies its manufacturing requirements and technical delivery conditions.
-
European Standard EN10130 Low carbon cold rolled steel DC01 strip
DC01 steel is a type of cold-rolled low carbon steel. It is known for its excellent formability and high strength. DC01 steel is commonly used in the automotive industry for manufacturing parts such as body panels, chassis components, and structural parts.
-
Cold Rolled Grain Electrical Silicon Steel Sheet
Silicon steel sheet is an alloy, and iron-silicon alloy formed by adding a small amount of silicon (generally below 4.5%) to pure iron is called silicon steel. Electrical steel, also called lamination steel, silicon electrical steel, silicon steel or transformer steel, is a material used to produce certain magnetic cores, such as stators and rotors in transformers and motors. Electrical steel is also an indispensable material for the power, electronics and military industries.
