Cold rolled steel Factory - China Cold rolled steel Manufacturers, Suppliers

  • DC01 Cold rolled steel sheet coil DIN EN 10130 10209 DIN 1623

    DC01 Cold rolled steel sheet coil DIN EN 10130 10209 DIN 1623

    COLD ROLLED STEEL SHEET AND COIL – (DC01 BS EN 10130:2006)

    Cold rolled steel, (often referred to as Cold reduced or CR), is a low carbon product, produced using raw material such as coke and coal at steel mills through out the world.

    DC01 steel (1.0330 material) is a European standard cold-rolled quality low-carbon steel flat product for cold forming. … In addition, this steel is also used under electrogalvanizing conditions. The designation of the steel is DC01+ZE (or 1.0330+ZE), and the standard is EN 10152

  • Prime CRC Households appliance cold rolled steel coil sheet SAE1008 SPCC

    Prime CRC Households appliance cold rolled steel coil sheet SAE1008 SPCC

    Households appliance cold rolled steel coil sheet SAE1008 SPCC
    1 Thickness: 0.15-3.0mm

    2 Width: 750-1010/1220/1250mm

    3 Length as per customer’s request.

    4 Steel Grade:SPCC, SPCD, SPCE, DC01, DC02, DC03, DC04, SAE 1006, SAE 1008 etc.

    Soft commercial quality, Full hard quality or Deep Drawing quality.

    5 Packing: standard export packing.

  • Commercial use DC01, DC02, DC04 Full Hard Quality Cold Rolled Steel Sheet

    Commercial use DC01, DC02, DC04 Full Hard Quality Cold Rolled Steel Sheet

    DC01,DC02,SAE1006 Cold Rolled Steel Sheet With Soft Commercial, Full Hard Quality
    1 Thickness: 0.15-3.0mm

    2 Width: 750-1010/1220/1250mm

    3 Length as per customer’s request.

    4 Steel Grade:SPCC, SPCD, SPCE, DC01, DC02, DC03, DC04, SAE 1006, SAE 1008 etc.

    Soft commercial quality, Full hard quality or Deep Drawing quality.

    5 Packing: standard export packing.

  • cold rolled steel coil DC01 DC03 DC04 DC06

    cold rolled steel coil DC01 DC03 DC04 DC06

    DC03 – This grade is suitable for forming requirements such as Deep drawing and difficult profiles suitable. DC04 – This quality is suitable for high deformation requirements. … DC06 – This special deep drawing quality is suitable for the highest deformation requirements.

  • Skin passed EN10130 Grade DC01 SPCC cold rolled steel coils

    Skin passed EN10130 Grade DC01 SPCC cold rolled steel coils

    Cold-rolled coils are widely used, such as automobile manufacturing, electrical products, rolling stock, aviation, precision instruments, food cans, printed iron drums, construction, building materials, bicycles and other industries. At the same time, it is also the best choice for the production of organic coated steel plates.

    Heat Treatment Code HRBS HV10
    Annealed A – –
    Annealed + Finishing S – –
    1/8 hard 8 50~71 95~130
    1/4 hard 4 65~80 115~150
    1/2 hard 2 74~89 135~185
    Full hard 1 ≥85 ≥170

  • cold rolled steel sheet and coil,CR CRC

    cold rolled steel sheet and coil,CR CRC

    Payment & Shipping Terms:
    Minimum Order Quantity: 20tons
    Price: According to the quality and quantity
    Packaging Details: Standard export seaworthy package
    Delivery Time: Within 30days(usually no more than 20 days)
    Payment Terms: T/T or L/C (We charge 30% of the deposit first.)
    Supply Ability: 18000 tons per month

     

  • Custom Cut Deep Drawing Cold Rolled Steel Coils SPCD / SPCE / DC03

    Custom Cut Deep Drawing Cold Rolled Steel Coils SPCD / SPCE / DC03

    SPCD / SPCE / DC03 custom cut Deep Drawing Cold Rolled Steel Coils / Coil

    Cold rolled steel sheet in coil

    Deep Drawing quality

    1 Thickness: 0.3-2.0mm

    2 Width: 700-1250mm

    3 Inner diameter: 508mm

    4 Steel Grade: SPCD, SPCE, DC03

    5 Packing: standard export packing

    6 Cutting and slitting can be requested as customer’s designation.

  • Deep Drawing / Full hard / Soft commercial SPCC, SPCD, SPCE Cold Rolled Steel Coils / Coil

    Deep Drawing / Full hard / Soft commercial SPCC, SPCD, SPCE Cold Rolled Steel Coils / Coil

    Cold rolled coils grades of SPCC, SPCCT, SPCD, SPCE, SPCF, SPCG
    Cold rolled steel sheets & coils grade of SPCC is the Japanese steel grade, from JIS G3141. Standard name: common & general use of cold-rolled carbon steel sheet and strip. The same category in the standard grades is SPCD, SPCE, SPCF, SPCG

    Steel Grade: SPCC、SPCD、SPCE,Q195,Q235,DC03、DC04、DC05,HC260LA、HC380LA、HC420LA,HC260P、HC300P,HC260Y
    Dimension: Thickness: 0.5~2.0mm; width: 800-1430mm
    Delivery State: Cold Rolled
    Steel Standard: JIS G3141, EN10130, EN10268, GB/T5213
    Fabrication Service: Uncoil Steel Sheet; Slit Steel Coil

  • cold rolled steel sheet and coil,CR CRC

    cold rolled steel sheet and coil,CR CRC

    Minimum Order Quantity: 20tons
    Price: According to the quality and quantity
    Packaging Details: Standard export seaworthy package
    Delivery Time: Within 30days(usually no more than 20 days)
    Payment Terms: T/T or L/C (We charge 30% of the deposit first.)
    Supply Ability: 18000 tons per month

    Cold rolled coils grades of SPCC, SPCCT, SPCD, SPCE, SPCF, SPCG
    Cold rolled steel sheets & coils grade of SPCC is the Japanese steel grade, from JIS G3141. Standard name: common & general use of cold-rolled carbon steel sheet and strip. The same category in the standard grades is SPCD, SPCE, SPCF, SPCG.

    SPCC/SPCCT/SPCD/SPCE/SPCF/SPCG Cold Rolled Coils​​
    S: Steel
    P: Plate
    C: Cold
    C: Common
    D: Draw
    E: Elongation
    Steel Grade: SPCC、SPCD、SPCE,Q195,Q235,DC03、DC04、DC05,HC260LA、HC380LA、HC420LA,HC260P、HC300P,HC260Y
    Dimension: Thickness: 0.5~2.0mm; width: 800-1430mm
    Delivery State: Cold Rolled
    Steel Standard: JIS G3141, EN10130, EN10268, GB/T5213
    Fabrication Service: Uncoil Steel Sheet; Slit Steel Coil

  • SAE 1008 SPCC Hard processed cold rolled steel strip coils

    SAE 1008 SPCC Hard processed cold rolled steel strip coils

    brightness / black finish soft, hard, worked Cold Rolled Steel Strip / Strips:
    Max. Width (mill edge): 720 mm
    Min. Width (slit edge): 39 mm
    Max. Thickness: 2.0 mm
    Min. Thickness: 0.3 mm
    Inside diameter: 400mm or 508mm
    Outside diameter: 850~1500mm

    SAE 1008 Cold Rolled Carbon Steel Coils with full hard are mainly used in automobile, printed metal pail, building, building materials, and bicycle, etc. Additionally, it is the best material to manufacture organic coated strip

Leave Your Message

    * Name

    * Email

    Phone/WhatsAPP/WeChat

    * What I have to say