China High Strength Aluminium Alloy Plate 7075 7050 T3 T4 T6 T651 3mm 5mm 6mm 15mm Manufacturer and Supplier | Ruiyi
7075 aluminium alloy plate is an aluminium alloy, with zinc as the primary alloying element. It is strong, with a strength comparable to many steels, and has goodfatigue strength and average machinability.
7075 alloy aluminum plate is made of one of the strongest of the aluminum alloys. Its use parallels that of 2024, with 7075 selected when higher mechanical properties are desired. 7075 aluminum is an aluminum-zinc alloy with 1%-8% zinc in addition to small amounts of magnesium and small quantities of copper and chromium.
7075-T6 Bare Aluminum alloy sheet | aluminium alloy Plate is primarily used in aerospace industry, often referred to as the Strongest Aluminum grade
Chemical Analysis of aluminum alloy Plate | ||||||||||
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | – | – | 0.05 | 0.03 | Remains |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | – | – | – | – | – | Remains |
1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | – | – | – | – | Remains |
1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | – | – | 0.1 | – | – | Remains |
1200 | 1 | 1 | 0.05 | 0.05 | – | – | – | 0.1 | 0.05 | Remains |
3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | – | – | – | 0.1 | – | Remains |
5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | – | 0.25 | – | Remains |
5042 | 0.2 | 0.35 | 0.15 | 0.2–.5 | 3.0-4.0 | 0.1 | – | 0.25 | 0.1 | Remains |
5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | – | 0.1 | – | Remains |
5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | – | 0.25 | – | Remains |
5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | – | 0.2 | – | Remains |
6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | – | 0.25 | – | Remains |
6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | – | 0.1 | – | Remains |
6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | – | 0.2 | – | Remains |
7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | – | 5.7-6.7 | 0.06 | Remains |
7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | – | 5.1-6.1 | 0.2 | Remains |