Steel plate

  • Wear Resistant Steel Plate BHNM400 BHNM450 BHNM500

    Wear Resistant Steel Plate BHNM400 BHNM450 BHNM500

    Wear Resistant Steel Plate refers to a special plate product specially designed for use under large-area wear conditions. Commonly used wear-resistant steel plates are plate products made by compounding a certain thickness of alloy wear-resistant layer with higher hardness and excellent wear resistance on the surface of ordinary low carbon steel or low alloy steel with good toughness and plasticity through surfacing method. In addition, there are cast wear-resistant steel plates and alloy que...
  • ABS Approved AH36 DH36 BV Grade Marine Steel Plate

    ABS Approved AH36 DH36 BV Grade Marine Steel Plate

    Marine steel plate is an important component in shipbuilding, and the selection of steel materials is very important. Commonly used ship plate steel models include AH32, AH36, DH32, DH36, D36, E36, F36 and HSLA series steel. Top Metal Manufacturer Supply ABS approved Marine Steel Plate with different sizes. ABS A and ABS B are types of structural steel that are used for shipbuilding. These steel grades are defined as ordinary strength and these grades are certified by the American Bureau of Shipping (ABS) so that they can be used in shipbuilding

  • BV Marine Grade AH36 ccsb ah32 dh36 eh36 Shipbuilding steel plates

    BV Marine Grade AH36 ccsb ah32 dh36 eh36 Shipbuilding steel plates

    AH36, DH36, EH36 Steel Plate for Shipbuilding. Shipbuilding steel plate refers to the carbon and alloy steel plate used in offshore and marine contructions, common grades are A, B, D, E, AH32/36/40, DH32/36/40, and EH32/36/40 which ranged from different strength.

  • high-strength wear resistant NM400 plate

    high-strength wear resistant NM400 plate

    NM series is a high-strength wear resistant plate with high hardness. The Brinell hardness value from 370 to 430 (HBW), and mainly to provide protection in the occasion or part where wear resistance is required, so that the equipment life is longer and the maintenance is reduced. NM400 Steel Plate is a type of wear-resistant steel plate that is commonly used in various industrial applications.

  • Heavy Steel Plate

    Heavy Steel Plate

    High carbon heavy steel plate offers the greatest strength and hardness compared to mild and medium carbon steel plate. However, high carbon steel is less ductile than lower carbon steels, meaning it is much harder to machine or form.

  • Commercial use hot rolled steel plate Hot rolled Pickled steel coils

    Commercial use hot rolled steel plate Hot rolled Pickled steel coils

    Hot-rolled steel coil products have excellent properties such as high strength, good toughness, easy processing and good weldability, so they are widely used in manufacturing industries such as ships, automobiles, bridges, construction, machinery, and pressure vessels.

  • AISI 430 Stainless Steel Plate SS430 stainless steel coil

    AISI 430 Stainless Steel Plate SS430 stainless steel coil

    430 stainless steel is a general-purpose steel with good corrosion resistance. It has better thermal conductivity than austenite, a smaller thermal expansion coefficient than austenite, heat fatigue resistance, addition of stabilizing element titanium, and good mechanical properties at the weld. 430 stainless steel is used for building decoration, fuel burner parts, household appliances, and home appliance parts. 430F is a steel grade with free-cutting performance added to 430 steel. It is mainly used for automatic lathes, bolts and nuts.

    Steel 430 is used in lots of decorative applications where chances of stress corrosion cracking are high. Common applications are

    • Dish Washer Liners
    • Refrigerator Cabinet Panels
    • Stove Trim Rings
    • Fasteners
    • Fuel Linings
  • Low nickel 201 stainless steel strip coil

    Low nickel 201 stainless steel strip coil

    Grade 201 stainless steel strip is a lower-cost alternative to the conventional Cr-Ni austenitic stainless steels, such as 304 strips.

    About half of the nickel content of 304 is replaced with alloy additions of manganese and nitrogen. This results in a higher strength than 304.

    201 stainless steel strip has relatively lower ductility and formability compared to 301 stainless steel strip.

    Grade 201 also has good welding characteristics and low temperature properties.

    Grade 201 stainless steel strip has good formability and corrosion resistance and this makes it suitable for below applications such as kitchen equipment and catering equipment.

    The good strength ensures suitability in applications such as stainless steel banding straps, clamps, brackets and cable ties.

  • SAE1008 cold rolled steel sheet

    SAE1008 cold rolled steel sheet

    SAE1008 High-quality carbon structural steel

    SAE1008 is a low-carbon steel material with high elongation and smooth surface. It is mainly used for stress relief plane tension levelers. Material SAE1008, standard ASTM A510M-82 belongs to low carbon steel, with high elongation, smooth surface, mirror effect, thickness standard, flat plate shape, rust resistance, etc. It is suitable for various metal stamping stretching, performance good. Such as lighting, fans, smoking machines, VCD machine shells, motorcycle fuel tanks, rice cookers, etc.

    Equivalent Grade Worldwide

    European old
    DC01 (1.0330)

    ASTM A1008 is one of the most commonly used materials in the construction industry. It is used in everything from bridges and buildings to guardrails and handrails. It’s most commonly used in the creation of gears and other machinery parts, but it can be used in a variety of other applications as well.

    It’s also common in transportation, particularly as structural support for trains, buses, and automobiles.

    This material has many benefits over other types of steel: it’s easy to weld and can be bent without much difficulty or distortion; it’s resistant to corrosion, and it has a high yield strength (4125 megapascals). It also has good impact strength (1750 megapascals)

    The name “1008” comes from its chemical composition: 0.08% to 1.2% carbon content by weight, making it medium-carbon steel. This means that 1008 steel is more than 99% iron, which gives it a high level of durability and strength. It has good toughness and strength at both low and high temperatures

    ASTM A1008 cold-rolled steel sheets are available in the market in the following designations:

    • Deep Drawing Steel (DDS)
    • Extra Deep Drawing Steel (EDDS)
    • Structural Steel (SS)
    • High-Strength, Low-Alloy Steel (HSLAS)
    • High-Strength, Low-Alloy Steel with Improved Formability (HSLAS-F)
    • Solution Hardened Steel (SHS)
    • Bake Hardenable Steel (BHS)
  • ASTM A1008 cold rolled carbon steel plate A36 Hot Rolled steel sheet

    ASTM A1008 cold rolled carbon steel plate A36 Hot Rolled steel sheet

    ASTM A36 Steel Plate is one of the most common grades of steel used in structural applications. This mild carbon steel grade contains chemical alloys that give it properties such as machinability, ductility, and strength that are ideal for use in constructing a variety of structures.

    A36 is a low carbon steel. Low carbon steels are classified by having less than 0.3% carbon by weight. This allows A36 steel to be easily machined, welded, and formed, making it extremely useful as a general-purpose steel. The low carbon also prevents heat treatment from having much of an effect on A36 steel

    ASTM A36 is said to be same as EN S275 steel plate. A36 steel is a very low carbon steel that blends great strength with form ability

    ASTM A1008 is a type of carbon steel used for a wide variety of applications that need high strength and toughness. It is used in the automotive, construction, and aerospace industries.

    It is a type of steel used for manufacturing parts that are subjected to high pressure, such as hydraulic cylinder parts and valves. It is usually used in the form of plates, sheets, bars, and tubes.

12 Next > >> Page 1 / 2