Cold rolled steel

  • Cold Rolled Grain Electrical Silicon Steel Sheet

    Cold Rolled Grain Electrical Silicon Steel Sheet

    Non-oriented electrical steel usually contains a level of 2%-3.5% silicon. It has similar magnetic properties in all directions, the so-called isotropy. Grain-oriented electrical steel usually contains a level of 3% silicon and is processed in a way to develop ideal properties in the rolling direction. Cold-rolled non-grain-oriented steel (CRNGO) is less expensive than cold-rolled grain-oriented steel (CRGO). CRNGO can be used in cost-oriented applications with the inconstant direction of mag...
  • AISI 430 Stainless Steel Plate SS430 stainless steel coil

    AISI 430 Stainless Steel Plate SS430 stainless steel coil

    430 stainless steel is a general-purpose steel with good corrosion resistance. It has better thermal conductivity than austenite, a smaller thermal expansion coefficient than austenite, heat fatigue resistance, addition of stabilizing element titanium, and good mechanical properties at the weld. 430 stainless steel is used for building decoration, fuel burner parts, household appliances, and home appliance parts. 430F is a steel grade with free-cutting performance added to 430 steel. It is mainly used for automatic lathes, bolts and nuts.

    Steel 430 is used in lots of decorative applications where chances of stress corrosion cracking are high. Common applications are

    • Dish Washer Liners
    • Refrigerator Cabinet Panels
    • Stove Trim Rings
    • Fasteners
    • Fuel Linings
  • Low nickel 201 stainless steel strip coil

    Low nickel 201 stainless steel strip coil

    Grade 201 stainless steel strip is a lower-cost alternative to the conventional Cr-Ni austenitic stainless steels, such as 304 strips.

    About half of the nickel content of 304 is replaced with alloy additions of manganese and nitrogen. This results in a higher strength than 304.

    201 stainless steel strip has relatively lower ductility and formability compared to 301 stainless steel strip.

    Grade 201 also has good welding characteristics and low temperature properties.

    Grade 201 stainless steel strip has good formability and corrosion resistance and this makes it suitable for below applications such as kitchen equipment and catering equipment.

    The good strength ensures suitability in applications such as stainless steel banding straps, clamps, brackets and cable ties.

  • SAE1008 cold rolled steel sheet

    SAE1008 cold rolled steel sheet

    SAE1008 High-quality carbon structural steel

    SAE1008 is a low-carbon steel material with high elongation and smooth surface. It is mainly used for stress relief plane tension levelers. Material SAE1008, standard ASTM A510M-82 belongs to low carbon steel, with high elongation, smooth surface, mirror effect, thickness standard, flat plate shape, rust resistance, etc. It is suitable for various metal stamping stretching, performance good. Such as lighting, fans, smoking machines, VCD machine shells, motorcycle fuel tanks, rice cookers, etc.

    Equivalent Grade Worldwide

    EU
    EN
    USA
    -
    Germany
    DIN,WNr
    Japan
    JIS
    France
    AFNOR
    England
    BS
    European old
    EN
    Italy
    UNI
    Spain
    UNE
    China
    GB
    Sweden
    SS
    Czechia
    CSN
    Austria
    ONORM
    Russia
    GOST
    Inter
    ISO
    India
    IS
    DC01 (1.0330)
    SAE1008
    SAE1010
    FeP01
    St12
    SPCC
    C
    F12
    FeP01
    CR4
    FeP01
    FeP01
    FeP01
    AP00
    08
    08F
    1142
    11321
    St02F
    08kp
    08ps
    Cr01
    CR22

    ASTM A1008 is one of the most commonly used materials in the construction industry. It is used in everything from bridges and buildings to guardrails and handrails. It’s most commonly used in the creation of gears and other machinery parts, but it can be used in a variety of other applications as well.

    It’s also common in transportation, particularly as structural support for trains, buses, and automobiles.

    This material has many benefits over other types of steel: it’s easy to weld and can be bent without much difficulty or distortion; it’s resistant to corrosion, and it has a high yield strength (4125 megapascals). It also has good impact strength (1750 megapascals)

    The name “1008” comes from its chemical composition: 0.08% to 1.2% carbon content by weight, making it medium-carbon steel. This means that 1008 steel is more than 99% iron, which gives it a high level of durability and strength. It has good toughness and strength at both low and high temperatures

    ASTM A1008 cold-rolled steel sheets are available in the market in the following designations:

    • Deep Drawing Steel (DDS)
    • Extra Deep Drawing Steel (EDDS)
    • Structural Steel (SS)
    • High-Strength, Low-Alloy Steel (HSLAS)
    • High-Strength, Low-Alloy Steel with Improved Formability (HSLAS-F)
    • Solution Hardened Steel (SHS)
    • Bake Hardenable Steel (BHS)
  • ASTM EN10310 JISI Standard carbon steel strip Cold rolled Steel strip coil CRC

    ASTM EN10310 JISI Standard carbon steel strip Cold rolled Steel strip coil CRC

    ASTM EN10310 JISI Standard carbon steel strip Cold rolled Steel strip coil CRC

    Cold rolled steel sheet are mainly used in automobile, printed metal pail, building, building materials, and bicycle, etc. Additionally, it is the best material to manufacture organic coated strip.

    Standard:JIS, ASTM, EN10130

    Grade:     SPCC, SPCD, ST12, ST13, ST14/16, DC01, DC02, DC03, DC04, DC05, DC06, Q195, Q195L,SAE1008,SAE1006

    Thickness: 0.2-5.0mm

    Width:15-1500mm.

    (1) when the strip steel is rolled in a cold state, because of the work hardening of the strip steel, it must be softened again by intermediate annealing, and its plasticity should be restored in order to continue rolling;

    (2) Before rolling, the surface scale of strip steel must be removed, thus ensuring the surface smoothness of strip steel and reducing the wear of rolls;

    (3) Tension rolling is adopted, which ensures the good shape of strip steel, controls the thickness deviation of strip steel, reduces the rolling pressure, and is beneficial to rolling thin gauge products.

    (4) Process cooling and lubrication are adopted, which is convenient to control the temperature of the roll and strip steel, reduce the friction between the roll and strip steel and reduce the rolling pressure, which is beneficial to the shape control and prevents the strip steel from sticking to the roll.

    Cold rolled steel strip is widely used in cutting-edge technical fields, such as automobile, instrumentation, radio, national defense and aerospace industry, etc.

  • CRC Manufacture Black Annealed Cold Rolled Steel Coil With SPCC DX51D Q195 Q235

    CRC Manufacture Black Annealed Cold Rolled Steel Coil With SPCC DX51D Q195 Q235

    Mill & Slit edge JIS G3141, SPCC, SPCD, SPCE, EN10130, GB Cold Rolled Steel Strip / Strips

     As per JIS G 3141 SPCC/SPCD/SPCE/SPCC-1B, EN10130 DC01/DC02/DC03/DC04, DIN1623 ST12/ST13/ST14,

    GB/T 700 Q195/Q235/Q345, SAE 1006, SAE 1008 etc

    Anneal surface shape: brightness and black surface finish, Mill edge & Slit edge.

    Coil Weight max. 7 MT,  Coil ID 508mm

    Thickness: 0.3~3.0MM

    Width: 35~720MM

    Minimum order: 50MT per size

  • Cold rolled low carbon DC01 DC03 DC04 DC05 DC06 steel sheet plate strip coil,

    Cold rolled low carbon DC01 DC03 DC04 DC05 DC06 steel sheet plate strip coil,

    Cold rolled low carbon DC01 DC03 DC04 DC05 DC06 steel sheet plate strip coil

    Cold rolled steel coil is the abbreviation of cold-rolled plain carbon structural plate, also known as cold-rolled sheet, commonly known as the cold plate. Cold plate is made of ordinary carbon structural steel hot rolled steel strip, after further cold rolling steel plate thickness is less than 4mm. Due to the rolling at room temperature, do not produce iron oxide, so cold plate surface quality, high dimensional accuracy, coupled with the annealing, mechanical and technological properties are superior to hot-rolled steel sheet, in many areas, especially household electrical appliance manufacturing, has been gradually replaced with its hot-rolled steel sheet

  • DC01 Steel Coil prime Cold rolled Steel Sheet Strips Steel Plate

    DC01 Steel Coil prime Cold rolled Steel Sheet Strips Steel Plate

    Cold Rolled Steel Strip SPCC DC01 DC04 Cold Rolled Steel Coil 0.3-3.0mm

    Name DC01 Steel Coil prime Cold rolled Steel Sheet Strips Steel Plate
    Standard JISG3141 2005 / EN 10130 1998 / GB/T 708
    Grade Q195,Q215,Q235,SGCC,CGCC,SPCC,SPCD,SPCE,DX51D,DX52D,SPHC,DC01,DC03,DC04,ST12..
    Width 600~1250mm
    Thickness 0.125~3.0mm
    Surface treatment chromated / galvanized/oiled/annealed
    ID coil 508mm or 610mm
    Coil weight 3-8 MT
    Package: Standard exporting package
    Application

    Industrial panels, roofing and siding for painting

    Price terms

    FOB,CFR,CIF

    Payment terms

    30%T/T in advance+70% T/T

  • EN 10130 DC01 Steel 1.0330 cold rolled steel flat sheet

    EN 10130 DC01 Steel 1.0330 cold rolled steel flat sheet

    DC01 steel (1.0330 material) is a European standard cold-rolled quality low-carbon steel flat product for cold forming. In BS and DIN EN 10130 standard, it contains 5 other steel grades: DC03 (1.0347), DC04 (1.0338), DC05 (1.0312), DC06 ( 1.0873) and DC07 (1.0898), the surface quality is divided into 2 types: DC01-A and DC01-B. In addition, this steel is also used under electrogalvanizing conditions. The designation of the steel is DC01+ZE (or 1.0330+ZE), and the standard is EN 10152.

    DC01 Meaning and Definition

    • D: (Drawing) flat products for cold forming
    • C: Cold rolled
    • DC01: Drawing quality
    • DC03: Deep drawing quality;
    • DC04, DC05: Special deepdrawing quality;
    • DC06: Extra deepdrawing quality;
    • DC07: Super deep drawing quality.
  • ASTM A1008 DIN16723 EN10130 cold rolled steel plate sheet for Oil drum

    ASTM A1008 DIN16723 EN10130 cold rolled steel plate sheet for Oil drum

    Cold rolled coil is produced by pickling hot-rolled coil and rolling it uniformly at an appropriated temperature to a thinner thickness. It has excellent surface configuration and superb mechanical properties for use in automobile and electronic appliance production.

    Standard Specification
    JIS G 3141:2005 SPCCT-SD SPCD-SD, SPCE-SD, SPCF-SD,SPCG-SD
    ASTM A1008 CS TYPE A /B/ C DS TYPE A /B, DDS EDDS
    EN10130:2005 DC01 DC03 DC04 DC05 DC06
    EN10268:2006 HC420LA HC380LA HC340LA HC300LA HC260LA
    SAE J403 SAE1006 SAE1008 SAE1010
    JIS C2553 DC01EK DC03EK DC05EK

    Chemical Components:

     

    Grade Chemical Components
    C Mn P S Alt
    St12 ≤0.10 ≤0.50 ≤0.035 ≤0.025 ≥0.020
    St13 ≤0.08 ≤0.45 ≤0.030 ≤0.025 ≥0.020
    St14 ≤0.08 ≤0.40 ≤0.025 ≤0.020 ≥0.020

     

    Mechanical Properties:

    1. Yield Strength: ≤320MPa

    2. Tensile Strength: ≤370MPa

    3. Elongation (L=50mm, b=25mm) When:

    (1) Nominal Thickness <0.25mm: 30%

    (2) Nominal Thickness 0.25mm-<0.40: 32%

    (3) Nominal Thickness 0.40-<0.60mm: 34%

    (4) Nominal Thickness 0.60-<1.0mm: 36%

    (5) Nominal Thickness 1.0-<1.6mm: 37%

    (6) Nominal Thickness >1.6mm: 38%

     

    Application:

    1. Base metal for coated and dipped products.

    2. Home appliance and home furniture

    3. Bicycle

    4. Building industry

    5. Battery Shell

    6. Automobile fitting, hardware

    7. Industrial products including motors, generators

     

    Size Range: 0.30~3.0mm x 800–2000mm x Coil/Sheet

    Coil ID: 508mm/610mm

    Coil weight: 5—25MT

    Bundle weight: max 2.5mt or max 5mt

    Available Chinese Mill: WISCO,Capital Steel(Shougang), Ansteel, Maanshan, Baotou, Lianyuan, Tangshan, Jinan, Panzhihua, Kunming, etc and private mills

     

     

12 Next > >> Page 1 / 2