-
Commercial use hot rolled steel plate Hot rolled Pickled steel coils
Hot-rolled steel coil products have excellent properties such as high strength, good toughness, easy processing and good weldability, so they are widely used in manufacturing industries such as ships, automobiles, bridges, construction, machinery, and pressure vessels.
-
AISI 430 Stainless Steel Plate SS430 stainless steel coil
430 stainless steel is a general-purpose steel with good corrosion resistance. It has better thermal conductivity than austenite, a smaller thermal expansion coefficient than austenite, heat fatigue resistance, addition of stabilizing element titanium, and good mechanical properties at the weld. 430 stainless steel is used for building decoration, fuel burner parts, household appliances, and home appliance parts. 430F is a steel grade with free-cutting performance added to 430 steel. It is mainly used for automatic lathes, bolts and nuts.
Steel 430 is used in lots of decorative applications where chances of stress corrosion cracking are high. Common applications are
- Dish Washer Liners
- Refrigerator Cabinet Panels
- Stove Trim Rings
- Fasteners
- Fuel Linings
-
Low nickel 201 stainless steel strip coil
Grade 201 stainless steel strip is a lower-cost alternative to the conventional Cr-Ni austenitic stainless steels, such as 304 strips.
About half of the nickel content of 304 is replaced with alloy additions of manganese and nitrogen. This results in a higher strength than 304.
201 stainless steel strip has relatively lower ductility and formability compared to 301 stainless steel strip.
Grade 201 also has good welding characteristics and low temperature properties.
Grade 201 stainless steel strip has good formability and corrosion resistance and this makes it suitable for below applications such as kitchen equipment and catering equipment.
The good strength ensures suitability in applications such as stainless steel banding straps, clamps, brackets and cable ties.
-
SAE1008 cold rolled steel sheet
SAE1008 High-quality carbon structural steel
SAE1008 is a low-carbon steel material with high elongation and smooth surface. It is mainly used for stress relief plane tension levelers. Material SAE1008, standard ASTM A510M-82 belongs to low carbon steel, with high elongation, smooth surface, mirror effect, thickness standard, flat plate shape, rust resistance, etc. It is suitable for various metal stamping stretching, performance good. Such as lighting, fans, smoking machines, VCD machine shells, motorcycle fuel tanks, rice cookers, etc.
Equivalent Grade Worldwide
EU
ENUSA
–Germany
DIN,WNrJapan
JISFrance
AFNOREngland
BSEuropean old
ENItaly
UNISpain
UNEChina
GBSweden
SSCzechia
CSNAustria
ONORMRussia
GOSTInter
ISOIndia
ISDC01 (1.0330) SAE1008 SAE1010 FeP01 St12 SPCC C F12 FeP01 CR4 FeP01 FeP01 FeP01 AP00 08 08F 1142 11321 St02F 08kp 08ps Cr01 CR22 ASTM A1008 is one of the most commonly used materials in the construction industry. It is used in everything from bridges and buildings to guardrails and handrails. It’s most commonly used in the creation of gears and other machinery parts, but it can be used in a variety of other applications as well.
It’s also common in transportation, particularly as structural support for trains, buses, and automobiles.
This material has many benefits over other types of steel: it’s easy to weld and can be bent without much difficulty or distortion; it’s resistant to corrosion, and it has a high yield strength (4125 megapascals). It also has good impact strength (1750 megapascals)
The name “1008” comes from its chemical composition: 0.08% to 1.2% carbon content by weight, making it medium-carbon steel. This means that 1008 steel is more than 99% iron, which gives it a high level of durability and strength. It has good toughness and strength at both low and high temperatures
ASTM A1008 cold-rolled steel sheets are available in the market in the following designations:
- Deep Drawing Steel (DDS)
- Extra Deep Drawing Steel (EDDS)
- Structural Steel (SS)
- High-Strength, Low-Alloy Steel (HSLAS)
- High-Strength, Low-Alloy Steel with Improved Formability (HSLAS-F)
- Solution Hardened Steel (SHS)
- Bake Hardenable Steel (BHS)
-
ASTM A1008 cold rolled carbon steel plate A36 Hot Rolled steel sheet
ASTM A36 Steel Plate is one of the most common grades of steel used in structural applications. This mild carbon steel grade contains chemical alloys that give it properties such as machinability, ductility, and strength that are ideal for use in constructing a variety of structures.
A36 is a low carbon steel. Low carbon steels are classified by having less than 0.3% carbon by weight. This allows A36 steel to be easily machined, welded, and formed, making it extremely useful as a general-purpose steel. The low carbon also prevents heat treatment from having much of an effect on A36 steel
ASTM A36 is said to be same as EN S275 steel plate. A36 steel is a very low carbon steel that blends great strength with form ability
ASTM A1008 is a type of carbon steel used for a wide variety of applications that need high strength and toughness. It is used in the automotive, construction, and aerospace industries.
It is a type of steel used for manufacturing parts that are subjected to high pressure, such as hydraulic cylinder parts and valves. It is usually used in the form of plates, sheets, bars, and tubes.
-
High strength tension hot rolled pickled oiled S235 S355 S420 S550 structural carbon steel slitted strip coil
High strength tension hot rolled pickled oil S235 S355 S420 S550 carbon steel slitted strip coil
S355 grade steel is a medium tensile, low carbon manganese steel which is readily weldable and possesses good impact resistance (also in sub-zero temperatures).
What is the difference between S275 and S355 steel?S275 provides a lower strength (than S355) but has good machinability and can be welded. The average minimum yield for S275 steel is 275 N/mm² giving its name: S275. S355 is often used in the most demanding environments such as the offshore industry.EN10149 S420MC steel plate/sheet,EN10149 S420MC steel plate/sheet, under EN standard, we can regard S420MC steel plate/sheet as high yield strength steels for cold-forming steels.
S420MC steel plate is mainly used as high yield strength steels for cold-forming steels.
The EN10149 S420MC steel is equivalent to SEW092 QStE420TM, NFA E420D, UNI FeE420TM, ASTM X60XLK and BS HR50F45 steel grades.
S420MC EN 10149-2 Number:1.0980 Comparision of steel grades SEW092 QStE 420TM NFA36-231 E420D UNI8890 FeE420TM ASTM 060XLK BS1449 HR50F45 -
JIS3101Standard Hot rolled Mild General Structural SS400 Carbon steel Low alloy steel plate
JIS3101 Standard Hot rolled Mild General Structural SS400 Carbon steel Low alloy steel plate
SS400 is one of the most commonly used hot rolled general structural steel. SS400 steel plate, JIS3101 SS400 steel plate, under JIS3101 standard, we can regard SS400 steel plate as Carbon and low alloy steel SS400 steel plate is one mainly of Carbon and low alloy steel, SS400 steel plate would be used to built containers which can bear low temperature sea water.
As well as being available from stock all SS400 steel plate can be cut to size and shape according to your fabrication and design requirements and all work is governed by our independently accredited and regularly audited quality systems.Our SS400 steel plate are sourced from the highest quality steel manufacturers in the world and, like all our suppliers, these manufacturers have been vetted and assessed by our procurement team.
SS400 steel plate sheet is a kind of steel for general structure,and it is used in ship,house,bridge making and so on.This kind of steel plate sheet SS400 has some features,like its heat condition,excellent freezing,even structure with pressure resistance and its good mechanical properties.
This specification of SS400 steel plate covers carbon structural steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of bridges and buildings, and for general structural purposes. Heat analysis shall be used to determine the required chemical composition for carbon, manganese, phosphorus, sulfur, silicon, and copper. Tensile strength, yield strength, and elongation shall be evaluated using tension test and must conform to the required tensile properties. SS400 is a Japanese standard steel whose material is 1.0037.
-
304 316 Cold rolled stainless steel sheet coil
Stainless steel products are one of the most popular raw materials in construction and manufacturing. Due to its unique mechanical and physical properties, stainless steel coil has been widely used in the production of kitchen appliances and industrial equipment. They are rugged, corrosion resistant, lightweight and require low maintenance. In addition, we support customization of any product. In industry (especially in manufacturing), different grades of stainless steel coils can be found, such as 316, 316L, 304L, 304, 410S, 321, 201, 303, 304n, 2507, 2304, etc
Stainless steel sheet or coil is widely used in high-temperature and electric industry, medical devices, construction, chemistry, food industry, agriculture, and ship components.
Stainless steel also applies to food and beverage packaging, kitchen supplies, trains, aircraft, conveyor belts, vehicles, bolts, nuts, springs, and screen mesh etc.
Thickness：0.3-260
Width：1000，1219，1500，2000，2500，3000， etc
Length：1000，1500，2438，3000，5800，6000，9000，12000， etc
Products can be customizedSurface：BA，2B，NO.1，NO.4，4K，HL，8K
Standard：ASTM，AISI，JIS,GB， DIN,EN -
SPHC Pickled DD11 Commercial use Hot Rolled Steel plate sheet for automotive deep drawing parts
SPHC Pickled DD11 Commercial use Hot Rolled Steel plate sheet for automotive deep drawing parts
DD11 is a very low carbon, hot rolled steel sheet material extensively used in cold forming in the dry or pickled and oiled condition. The material has good welding qualities and is ideal for general forming applications. DD12, DD13 and DD14 specify even lower chemical and mechanical levels making them perfect for deep drawing, extra deep drawing and more complex presswork.
HR steel materials like DD11, SPHC, SPHD, STW22, S315MC, S420MC are Mainly used as various substrates and widely applied in automobile manufacture, cold pressing parts and structural parts, etc.
-
A283 A285 Hot rolled steel plate Cold rolled steel plate A36
A283 Grade C steel belongs to carbon structural steel. The tensile of A283 Grade C steel plate is low or mid-low. A283 Grade C steel plate is delivered in hot rolled condition. RuiYi provides hot rolled A283 Grade C steel plates thickness up to 220mm.
Category: Carbon Structural Steel
Steel Grade: Grade C
Standard: ASTM A283
Available: plates, wide flats, strips, sections and bars
Deliver Condition:
A283 Grade C steel plate can be delivered in +AR, +N, or +M condition.
Normalizing rolling (+N): rolling process in which the final deformation is carried out in a certain temperature range leading to a material condition equivalent to that obtained after normalizing so that the specified values of the mechanical properties are retained even after normalizing.
As-rolled (+AR): delivery condition without any special rolling and/or heat treatment condition.
Thermo-mechanical rolling (+M): rolling process in which the final deformation is carried out in a certain temperature range leading to a material condition with certain properties which cannot be achieved or repeated by heat treatment alone.
Machinability:
A283 Grade C steel is machinable with common operations such as cutting, grinding and welding.
Application:
A283 Gr C steel is mainly used to build factories, high voltage power transmission tower, Bridges, vehicles, boiler furnace, containers, ships, etc., also a lot less used as performance requirements for mechanical parts.
