China Low nickel 201 stainless steel strip coil Manufacturer and Supplier | Ruiyi

Short Description:

Grade 201 stainless steel strip is a lower-cost alternative to the conventional Cr-Ni austenitic stainless steels, such as 304 strips.

About half of the nickel content of 304 is replaced with alloy additions of manganese and nitrogen. This results in a higher strength than 304.

201 stainless steel strip has relatively lower ductility and formability compared to 301 stainless steel strip.

Grade 201 also has good welding characteristics and low temperature properties.

Grade 201 stainless steel strip has good formability and corrosion resistance and this makes it suitable for below applications such as kitchen equipment and catering equipment.

The good strength ensures suitability in applications such as stainless steel banding straps, clamps, brackets and cable ties.

Send email to us

Product Detail

Product Tags

Type 201 stainless steel is a low nickel, high-work hardening, austenitic chromium-nickel-manganese stainless steel. Type 201 stainless steel is not hardenable by heat treatment. It may be substituted, in some cases, for other higher nickel content alloys. Stainless is created by extracting chromite from underground mines.

201 stainless steel belongs to austenitic stainless steel, is the most commonly used in the 200 series in China.

Differ chemical element content between AISI 304 stainless steel and 201 stainless steel 1.1 Stainless steel plates that commonly used was divided into two types: 201 and 304. In fact, the components are different. 201 stainless steel contains 15% chromium and 5% nickel. 201 stainless steel is a substitute for 304 steel.

The stainless steel in grade 201 has an extremely low electrical conductivity. Therefore, stainless steel does not belong to the materials used for electrical conductivity.

However, the 201 stainless steel material has a strong resistance to high-temperature sensitization. Moreover, this can prevent lower temperature inter-granular corrosion.

Product	Stainless Steel Strip
Material	Ferrite stainless steel, magnetic.
Standard	AISI, ASTM, EN, GB, DIN, JIS
Grade available	201,202,J1,J2,J3,J4, 304,316,410,430
Technology	Cold Rolling
Thickness	0.15mm – 2.0mm
Inner Dia.	Φ10-220mm
Surface	BA, 2B, 2D, NO.1, NO.4, HL, 8K
Edge	Mill Edge, Slit Edge
Hardness	Full hard, Soft, Semi-DDQ, DDQ (Deep drawing quality)
Protection	1. Inter paper available
Protection	2. PVC protecting film available
ü The sizes or thicknesses of stainless steel coil can be customized, if you need additional information, please don’t hesitate to contact us at any time. ü All standard products are supplied without inter paper & PVC film. If needed, please inform.