China Atmospheric corrosion resistance 1350 Mill finish aluminum plate sheet factory Manufacturer and Supplier | Ruiyi

Short Description:

EN AW1350 is a non-heat-treatable aluminum alloy. Composed of a minimum 99.5% aluminum. Cold working increases its strength. Often used for electrical conductivity.

Aluminum Alloy 1350 is a high (99.5% min.) aluminum-content alloy with small additions of silicon, iron, copper, manganese, and other elements. Alloy 1350 is highly conductive and has good formability, leading to its use in electronics and other applications.

Alloy 1350 is primarily used in the manufacture of electrical conductors, and -H111 temper exhibits the highest electrical conductivity of all extruded aluminum conductor grades, meeting or exceeding 61.0% IACS.

Aluminum 1350A (99.5% Al min) has excellent formability and corrosion resistance and is the alloy of choice for electrical conductors

1350 o aluminum coil sheet is a commercially pure, very ductile in extruded condition. It has an excellent resistance to corrosion and excellent electrical conductivity. Mouldings, lightly stressed and decorative assemblies in architecture and transport, chemical, food and brewing equipment, heat exchangers.

Product Detail

Product Tags

Aluminum alloys 1050 and 1350 do have one specific difference in where the chemical composition of 1050 has a slightly higher max on its silicon content than 1350. It is a very small difference and they are both present as maximum values, but the small difference could affect critical applications

Temper: F, O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H111, H112, H114




Mother coil: CC or DC

Weight: About 2mt per pallet for general size

MOQ: 5-10ton per size

Protection: paper inter layer, white film, blue film, black-white film, micro bound film, according to your requirement.

Surface: clean and smooth, no bright speck, corrosion, oil, slotted, etc.

Standard product: GBT3880, JIS4000, EN485, ASTM-B209, EN573

Delivery time: about 30days after receiving the deposit

Payment: T/T, L/C at sight

Trading terms: FOB, CIF, CFR

1350 aluminum alloy sheet is used in various applications but its main uses are electrical conductors,pins, rods, and rivets.

Chemical Composition Limits
Weight% Si Fe Cu Mn Mg Cr Zn B Ga V+T Cr+Mn+Ti+V Others
1350 0.1 0.40 0.05 0.01 0.01 0.05 0.05 0.03 0.02 0.03 (each)
0.10 (total)
0.25 0.40 0.02 0.05 0.05 0.03 0.03 (each)
Material Temper Tensile Strength (N/mm²) Elongation in 50mm
1350 Bar M 60 min 23
1350 Bar H2 85 (min) 13

  • Previous:
  • Next:

  • Tags: , , , , , , , , , , , ,

    Leave Your Message

      * Name

      * Email


      * What I have to say

      Related Products

      Leave Your Message

        * Name

        * Email


        * What I have to say