China Short Lead Time for Cold Reduced Low Carbon Steel - EN 10130 DC01 Steel 1.0330 cold rolled steel flat sheet - Ruiyi Manufacturer and Supplier | Ruiyi

DC01 steel (1.0330 material) is a European standard cold-rolled quality low-carbon steel flat product for cold forming. In BS and DIN EN 10130 standard, it contains 5 other steel grades: DC03 (1.0347), DC04 (1.0338), DC05 (1.0312), DC06 ( 1.0873) and DC07 (1.0898), the surface quality is divided into 2 types: DC01-A and DC01-B. In addition, this steel is also used under electrogalvanizing conditions. The designation of the steel is DC01+ZE (or 1.0330+ZE), and the standard is EN 10152.

DC01 Meaning and Definition

• D: (Drawing) flat products for cold forming
• C: Cold rolled
• DC01: Drawing quality
• DC03: Deep drawing quality;
• DC04, DC05: Special deepdrawing quality;
• DC06: Extra deepdrawing quality;
• DC07: Super deep drawing quality.

• DC01-A: Allow defects that do not affect formability or surface coating, such as pores, slight dents, small marks, slight scratches, and slight coloring.
• DC01-B: Better surfaces shall be free from defects that may affect the uniform appearance of high-quality paints or electrolytic coatings. The other surface should meet at least surface quality A.
• DC01+ZE: Electrolytically zinc coated
• DC01EK: Conventionally enamelled

• Chemical Composition

  DC01 steel chemical composition is listed in the following table based on ladle analysis.

  Country (Region)	Standard	Chemical Composition (ladle analysis), %, ≤					Surface quality	Deoxidation	Classification
  		Steel name (Steel number)	C	Mn	P	S
  European Union	EN 10130	DC01 (1.0330)	0.12	0,60	0,045	0,045	A, B	Manufacturer’s discretion	Non-alloy quality steel
  	EN 10152	DC01+ZE (1.0330+ZE)					A, B
  	EN 10139	DC01-C390, C340, C440, C490, C590, C690					–

  Notes:

  • EN 10130 – Cold rolled low carbon steel flat products;
  • EN 10152 – Electrolytically zinc coated cold rolled steel flat products.
  • EN 10139 – Cold rolled uncoated low carbon steel narrow strip.

  DC01+ZE Steel Mechanical Properties

  The table below lists DC01+ZE steel mechanical properties.

• 	Mechanical properties, Part-1
  Country (Region)	Standard	Steel name (Steel number)	Yield strength (MPa), 0.2 % offset	Tensile strength (MPa)	Elongation, ≥ %	Surface quality	Absence of stretcher strain marks
  European Union	EN 10130	DC01 (1.0330)	140 (assumed) -280	270-410	28	A, B	–
  	EN 10152	DC01+ZE (1.0330+ZE)					3 months

  Notes:

  • Yield strength: When the thickness is ≤0.7 mm but >0.5 mm, the yield strength value should be increased by 20 MPa. For thicknesses ≤0.5 mm, the value should be increased by 40 MPa.
  • Elongation: When the thickness is ≤0.7 mm but >0.5 mm, the minimum value of elongation should be reduced by 2 units. For thicknesses ≤0.5 mm, the minimum value shall be reduced by 4 units.

    Mechanical properties, Part-2
    Standard	Designation	Delivery condition	Symbol	Yield strength (MPa), 0.2 % offset	Tensile strength (MPa)	Elongation, A80, ≥ %	Elongation, A50, ≥ %	Hardness, HV	Validity of the mechanical properties
    EN 10139	DC01 (1.0330)	Annealed	A	–	270 – 390	28	30	≤ 105	3 months
    		Skin passed	LC	≤ 280	270 – 410	28	30	≤ 115
    		Work hardened	C290	200 – 380	290 – 430	18	20	95-125
    			C340	≥ 250	340 – 490	Not required	Not required	105-155
    			C390	≥ 310	390 – 540			117-172
    			C440	≥ 360	440 – 590			135-185
    			C490	≥ 420	490 – 640			155-200
    			C590	≥ 520	590 – 740			185-225
    			C690	≥ 630	≥ 690			≥ 215

    Electrolytic Zinc Coatings

    Coating Designation	Nominal zinc coating values for each surface		Minimum zinc coating values for each surface
    	Thickness, µm	Mass, g/m²	Thickness, µm	Mass, g/m²
    ZE25/25	2,5	18	1,7	12
    ZE50/50	5,0	36	4,1	29
    ZE75/75	7,5	54	6,6	47
    ZE100/100	10,0	72	9,1	65

    DC01+ZE Steel Mass and Density

    DC01+ZE steel mass shall be calculated based on the density of steel 7.85 kg/dm³ and the density of zinc coating 7.1 kg/dm³.

    Applications

    The main application areas of the DC01 material include: automotive industry, construction industry, electronic equipment and home appliance industry, decorative purposes, food canning, etc.

    DC01 Steel Equivalent Material

    Material 1.0330, DC01 steel equivalent to ASTM, ISO, European (German DIN, British BSI, France NF), Japanese JIS and Chinese GB standard (for reference).

    Note: DIN 1623 has been replaced by DIN EN 10130, and the designation ST12 has been replaced by DC01.