China 7075 Aerospace aluminum plate sheet Manufacturer and Supplier | Ruiyi

Short Description:

7075 aluminum alloy (AA7075) is an aluminum alloy with zinc as the primary alloying element. It has excellent mechanical properties and exhibits good ductility, high strength, toughness, and good resistance to fatigue. It has moderated formability when in the fully soft, annealed temper and can be heat-treated to strength levels that are comparable to many steel alloys. In fact, grade 7075 aluminum is stronger than many types of mild steel.

7075-T6 aluminum has nearly double the strength-to-weight of grade 2 titanium

the 7075 Al alloy is most preferred by the aircraft industry. The composition of this specific Al alloy is 5.1–6.1% zinc, 2.1–2.9% magnesium, 1.2–2.0% copper and less than 0.5% of silicon, iron, manganese, titanium, chromium and other trace metals

Size of aluminum sheet

Thickness:0.2-6.0mm

Width:100-2400mm

Length:200-11000mm

Mother coil: CC or DC

Weight: About 2mt per pallet for general size

MOQ: 5 -15 ton per size

Protection: paper inter layer, white film, blue film, black-white film, micro bound film, according to your requirement.

Surface: clean and smooth, no bright speck, corrosion, oil, slotted, etc.

Standard product: GBT3880, JIS4000, EN485, ASTM-B209

Delivery time: about 30days after receiving the deposit

Payment: T/T, L/C at sight


Product Detail

Product Tags

One of the key reasons to consider 7075 aluminum is for its high strength. Alloyed with zinc, it is one of the strongest alloys available and stronger than 6061. But it offers a lower level of corrosion resistance than 6061 and is also more difficult to weld. 7075 is used in marine, automotive, and aerospace applications where strength is a very high priority. It is also used in a firearms manufacturing and is even used in hang glider frames

 

Aluminum Sheet / Plate 7075-T6/T651 is normally used for aerospace, military, and automotive applications. 7075 aluminum is the strongest aluminum, with the strength of many steels, while retaining aluminum’s lightweight qualities and corrosion resistance.

 

Alloy Temper Thickness Width
7075 T651 4-260mm 1200-3800mm
7075 T7651 4-260mm 1200-3800mm
7075 T7351 4-260mm 1200-3800mm

 

Mechanical properties

Alloy state Direction Thickness (mm) Tensile strength Yield Strength Breaking Elongation Standard
7075-T651 LT 6-260 570-590Mpa 495-515Mpa 10-13.5 GB/T3880
7075-T7651 LT 6-102 550-560Mpa 480-490Mpa 10.5-12.5 AMS4045K
7075-T7351 LT 6-102 500-520Mpa 420-435Mpa 10-12.5 AMS4078

Aluminum 7075 is a member of the 7000 series, which has zinc as its main alloying component and is well known for its extraordinarily high strength. Tempering treatment can then further enhance its high mechanical strength. This property makes alloy 7075 very popular in the aerospace and defense industries.

Its strength is comparable to that of many types of steel, but it has a much lower density. The alloy is an excellent substitute to steel in high-stress applications. It also excels in withstanding fatigue stress, rendering it very reliable, a quality much sought after in the industries mentioned above.

Alloy 7075 offers only average corrosion resistance, an outcome of the small amount of copper included in its chemical composition. It also features reasonable machinability and poor forming and weldability. Another drawback of this alloy is that it has a comparatively high-cost relative to other aluminum alloys due to its exceptionally high strength.

 


  • Previous:
  • Next:

  • Tags: , , , , , , , , ,

    Leave Your Message

      * Name

      * Email

      Phone/WhatsAPP/WeChat

      * What I have to say


      Related Products

      Leave Your Message

        * Name

        * Email

        Phone/WhatsAPP/WeChat

        * What I have to say